Brauniger GPS hakkında yardım ??
Moderatör: Moderatör Ekibi
- seccckin
- Mesajlar: 593
- Kayıt: 02.01.2009, 01:27
- Ad Soyad: Seckin Aparı
- Şehir: Manisa
- :
- Aldığı Beğeni: 22 / 3
- Pilot Menüsü:
Brauniger GPS hakkında yardım ??
Arkadaşlar merhaba Brauniger IQ Competino+ türkçe kullanım klavuzu varmıdır. ? Veya bu modeli kullanmasını iyi bilen arkadaşlar cihazın kullaanımı hakkında bilgi paylaşabilir mi ??
- htamerursavas
- Mesajlar: 198
- Kayıt: 26.10.2012, 23:32
- Ad Soyad: Hüseyin Tamer Ursavaş
- Şehir: İzmir
- Aldığı Beğeni: 91 / 9
- Pilot Menüsü:
- seccckin
- Mesajlar: 593
- Kayıt: 02.01.2009, 01:27
- Ad Soyad: Seckin Aparı
- Şehir: Manisa
- :
- Aldığı Beğeni: 22 / 3
- Pilot Menüsü:
Oguzhan yarısmada oldugundan soramadım aldığım kişide sanırım bilmiyor tam olarak öncelikle çözemediğim olay
Main Setup Menu ⇒ User Settings ⇒ Variometer ⇒ Thermal threshold from
bu ne anlama geliyor ? İngilizce kullanım klavuzunda şöyle bir şey yazıyor.
With weak or widely dispersed thermals this function
helps to relocate any lost thermals. A small arrow
pointing up in the compass rose shows the direction
to the last thermal with at least a 1 m/s climb. If this
arrow is positioned at the top of the display, then you
are flying towards the thermal, however, if it is
positioned in the lower part of the display, you are
flying away from the thermal.
In case one wants to use this function, then the
indicator "Dist Therm" should additionally be
activated in the user defined fields. This value
indicates the distance from the pilot to the last
Thermal.
Main Setup Menu ⇒ User Settings ⇒ Variometer ⇒ Thermal threshold from
bu ne anlama geliyor ? İngilizce kullanım klavuzunda şöyle bir şey yazıyor.
With weak or widely dispersed thermals this function
helps to relocate any lost thermals. A small arrow
pointing up in the compass rose shows the direction
to the last thermal with at least a 1 m/s climb. If this
arrow is positioned at the top of the display, then you
are flying towards the thermal, however, if it is
positioned in the lower part of the display, you are
flying away from the thermal.
In case one wants to use this function, then the
indicator "Dist Therm" should additionally be
activated in the user defined fields. This value
indicates the distance from the pilot to the last
Thermal.